Advantages:
- High-efficiency harmonic suppression capability: THD < 5%
- Equipment protection and lifespan extension: Reduces temperature rise and power loss; Suppresses voltage spikes
- Enhanced system stability: Improves power factor, strengthens grid compatibility
- High reliability and durability: High temperature resistance, rugged environmental adaptability
Key Selling Points:
- High-efficiency harmonic suppression
- Reduced operational and maintenance costs
- Environmental compliance
This series of harmonic suppression reactors is primarily designed to support low-voltage system power capacitors, improve the power factor of the power system, effectively suppress higher-order harmonics in the power grid, reduce overloads on capacitors caused by harmonics, prevent harmonic amplification, and ensure the safe operation of capacitors. It also improves the waveform of network voltage, enhances power supply quality, and contributes positively to the safe and economical operation of the power grid. It is suitable for reactive power compensation and filtering for loads with 3rd, 5th, 7th, 11th, and 13th harmonics.
| Trademark |
TongTian |
| Place of Origin |
Jiangsu, China |
| Product Name |
Resistant capacitor |
| Specification |
1030*780*320mm |
| Reactance Rate |
6%, 7%, 12%, 14% |
| Low Temperature Rise |
≤70K (@ rated current at power frequency) |
| Low Noise |
≤70K48, dB (@ power frequency, measured 1m from the product) |
| Insulation Class |
H Class (180ºC) |
| Voltage Resistance |
Apply 4kVac between phases and to ground for 1 minute, no breakdown phenomenon |
| Linearity |
1.8In, inductance value not less than 0.95 of rated inductance |
| Overtemperature Protection |
NC125ºC temperature control |
| Standards |
GB/T 1094.6-2011 IEC60076-6 "Reactors" |
| Connection Method |
Three-phase |
Three inputs and three outputs, with the top being the input terminal and the bottom being the output terminal. |
| Single-phase |
One input and one output, with the top being the input terminal and the bottom being the output terminal. |
| Installation altitude |
No higher than 2000m. |
| Installation location |
No severe mechanical vibrations. |
| Installation environment |
Temperature -25ºC to +45ºC, relative humidity not exceeding 90%. |
| There should be no flammable or explosive hazardous materials nearby, and good ventilation conditions should be ensured. If installed in a cabinet, ventilation equipment should be added. |
| Product Model |
A(mm) |
B(mm) |
C(mm) |
D(mm) |
E(mm) |
F(mm) |
G(mm) |
Material |
| SRCKSG0.48-0.35/7 |
185 |
185 |
90 |
90 |
150 |
18 |
10 |
Copper, Aluminum |
| SRCKSG0.48-0.7/7 |
185 |
185 |
90 |
90 |
150 |
18 |
10 |
Copper, Aluminum |
| SRCKSG0.48-1.05/7 |
185 |
185 |
90 |
90 |
150 |
18 |
10 |
Copper, Aluminum |
| SRCKSG0.48-1.4/7 |
225 |
210 |
120 |
105 |
180 |
18 |
10 |
Copper, Aluminum |
| SRCKSG0.48-1.75/7 |
225 |
210 |
120 |
105 |
180 |
18 |
10 |
Copper, Aluminum |
| SRCKSG0.48-2.1/7 |
225 |
210 |
120 |
105 |
180 |
18 |
10 |
Copper, Aluminum |
| SRCKSG0.48-2.8/7 |
225 |
230 |
120 |
105 |
180 |
18 |
10 |
Copper |
| SRCKSG0.48-2.8/7 |
235 |
230 |
120 |
105 |
180 |
18 |
10 |
Aluminum |
| SRCKSG0.48-3.5/7 |
225 |
230 |
120 |
105 |
180 |
18 |
10 |
Copper |
| SRCKSG0.48-3.5/7 |
235 |
230 |
120 |
105 |
180 |
18 |
10 |
Aluminum |
| SRCKSG0.48-4.2/7 |
265 |
230 |
140 |
115 |
190 |
18 |
10 |
Copper, Aluminum |
| SRCKSG0.48-2.1/14 |
225 |
210 |
120 |
105 |
180 |
18 |
10 |
Copper, Aluminum |
| Product Model |
A(mm) |
B(mm) |
C(mm) |
D(mm) |
E(mm) |
F(mm) |
G(mm) |
Material |
| SRCKSG0.525-2.8/14 |
225 |
210 |
120 |
105 |
180 |
18 |
10 |
Copper, Aluminum |
| SRCKSG0.525-3.5/14 |
265 |
235 |
140 |
115 |
190 |
18 |
10 |
Copper, Aluminum |
| SRCKSG0.525-4.2/14 |
265 |
235 |
140 |
115 |
190 |
18 |
10 |
Copper, Aluminum |
| SRCKSG0.525-5.6/14 |
300 |
280 |
140 |
115 |
190 |
18 |
10 |
Copper, Aluminum |
| SRCKSG0.525-7.0/14 |
300 |
280 |
140 |
125 |
200 |
18 |
10 |
Copper, Aluminum |
| SRCKSG0.525-8.4/14 |
300 |
280 |
140 |
125 |
200 |
18 |
10 |
Copper |
| SRCKSG0.25-0.23*3/7 |
240 |
180 |
135 |
85 |
175 |
18 |
10 |
Copper, Aluminum |
| SRCKSG0.25-0.35*3/7 |
240 |
180 |
135 |
85 |
185 |
18 |
10 |
Copper, Aluminum |
| SRCKSG0.25-0.47*3/7 |
240 |
180 |
135 |
95 |
185 |
18 |
10 |
Copper, Aluminum |
| SRCKSG0.25-0.58*3/7 |
240 |
200 |
135 |
100 |
190 |
18 |
10 |
Copper, Aluminum |
| SRCKSG0.25-0.7*3/7 |
240 |
200 |
135 |
100 |
190 |
18 |
10 |
Copper, Aluminum |
| SRCKSG0.25-0.93*3/7 |
240 |
200 |
135 |
100 |
190 |
18 |
10 |
Copper |
| SRCKSG0.25-0.93*3/7 |
250 |
220 |
135 |
105 |
200 |
18 |
10 |
Aluminum |
Haian Haiyan Electric Appliance Co.. Ltd.is a high-tech enterprise integrating researchand development,manufacturing and sales, located inHaian City, Nantong City, Jiangsu Province.Founded in 1992, the company mainly produces a series of capacitors such as CBB 60, CBB 61 ACmotor capacitor, CBB 24, CBB24S lamp compensation capacitor, CBB66SH American gold halogen lamp working capactor, CB8 65 air condi.tioning capacitor, low-voltage selfhealing parallel capacitor, AC filter resistance capacitor, cyindrical low-voltage parallel capacitor and soon.The company has a strong technical force, equipped with the latest imported automatic winding machine, automatc gold iniecion machineautomatic semi-.finished product testing machine, automatic finished product testing machine and other advanced production and manufacturingtesting equipment.The company over the years with first-class products and exquisite technology to serve users, enioy a good reputation in theindustry, products are sold throughout the country, at the same time exported overseas.
Q1-Could you tell me what are your advantages please?
1) We have 33 years of manufacturing experience since 1992.
2) We are an OBM manufacturer, we also provide ODM and OEM services at the same time.
2) Our products are mainly exported to the Southeast Asia, EU and USA markets.
3) We produce high-quality products in conformity with the VDE,CE, UL,ROHS,GB/T, and IEC standards.
4) We possess technical experts and services supporting for the EPC projects and project tendering.
Q2-How long is the lead time please?
It depends on the complexity of the order:
1) 3 weeks after payment for a standard order
2) Within 1 week after payment for a standard sample order.
Q3-Could I know the remittance route please?
1) Standard order could be paid by T/T.
2) Small order payment could be supported by Paypal and Global Pay.
Q4-Any suggestion for the delivery please?
We normally do EXW, FCA and FOB. In some special cases, we can also go DDU and DDP.
1) Express delivery, door to door service.
2) By air freight, to the designated airport of the destination country.
3) By sea, FCL , LCL, etc...
Q5-Any support or service for after sales please?
1) Standard quality guarantee is 18 months.
2) 24 hours online manual service for assistance and emergency.
Audited Supplier 
){kind=link}